Classic or long neck
RUITOOL Woodworking Marking Knife, Double Bevel
Double bevel · High-carbon steel
from$19.91
Marking Knives & Edge Tools · 45 degree and 1/8 in round
RUITOOL Chamfer Plane with Integrated V-Guide
$47.40
Plane with hex key
A small hand plane that breaks a sharp edge in one pass. Flip the cutter to switch between a 45 degree chamfer and a 1/8 inch round-over.
- Profiles
- 45 degree chamfer and 1/8 in round-over on one reversible cutter
- Guide
- V-guide, part of the one-piece body
- Depth
- Brass adjustment knob
- Body
- Aluminum, wood knob
Fits
- Easing edges on doors, boards, shelves and small furniture
Not for
- Heavy stock removal
Checkout, payment and delivery happen with our retail partner. Price from our update of 1 October 2026. How we update prices
What it does
The Chamfer Plane, in three points
One cutter, two profiles
A 45 degree face and a 1/8 in round face share one reversible blade.
V-guide in the body
The guide is part of the aluminum casting, so there is no fence to slip.
Brass depth knob
Turn the knob to set how far the cutter projects.
Specifications
- Profiles
- 45 degree chamfer and 1/8 in round-over on one reversible cutter
- Guide
- V-guide, part of the one-piece body
- Depth
- Brass adjustment knob
- Body
- Aluminum, wood knob
- In the box
- Plane and hex key
At the bench
Easing an edge with a router means a bit change, a cord and noise. For a few shelves, that setup takes longer than the cut. This plane rides the corner on its V-guide and takes a clean shaving. Set a light cut, make a pass, and add depth until the chamfer looks right. A hex key in the box holds the blade for flipping or replacing.
Check before you buy
- You want a 45 degree chamfer or a 1/8 in round-over.
- The work is light: breaking edges, not shaping moldings.
- You are happy to take two or three passes on hardwood.
Limits
Pick another one if
It is a tool for light edge work on doors, boards and small furniture. A wide chamfer on hardwood takes several passes. Against the grain it can tear, so read the grain and plane downhill. It cuts two profiles only. For other radii you still need router bits.
Same bench
RUITOOL Marking Knives & Edge Tools
5 tools, from $19.91. Set them side by side in one table.
All 5 RUITOOL Marking Knives & Edge ToolsFrom the same bench
More RUITOOL tools
Tools that share a bench or a job with the Chamfer Plane.
R1.5 and R2 grooves
RUITOOL Edge Banding Trimmer with Stainless Steel Blades
Veneer, PVC, ABS · R1.5 and R2 chamfer
$20.45
From buyers
What buyers say about the Chamfer Plane
Reviews word for word, with the critical ones left in.
Sharp tool that makes clean chamfers/radii
This chamfer plane was sharp straight out of the box. I was able to quickly adjust the depth and get a smooth clean 45° chamfer with clean curly shavings. Everything worked well and I was making cuts within about 30 seconds of opening the box. I did not try the radius side of the blade but it looks sharp and clean so I'm not concerned with trying it.I like the size and feel of this small plane. It fits right in your hand and is easy to get a smooth cut out of. The wood handle is nice looking and super smooth. This tool is the right size for small projects and large ones alike, and I can get a consistent exact chamfer every time. I would recommend this tool if you're in the market for one.
Great little tool. Nice and hefty . . . . . .
My opinion of this little chamfer tool is, WOW! Let's start with the weight of the item. The perfect amount of heft to make controlling the tool very easy. The item is made from a solid block of aluminum. The small wood knob fits just right in the palm of your hand and comfortable to use. The blade is micro adjustable and quite sharp. It cut through the edge of red oak with ease. A little sanding might be necessary, but that's more the nature of the wood. Control of the tool was great, thanks to the ample V-guide that I measured right at 90.0°. All in all, I would rate the tool as great quality and I would recommend it to others. In my opinion, the cost value is marginal.
Questions
Chamfer Plane: answers
How do I change the profile?
Loosen the blade with the hex key, flip it to the other face and tighten it again.
Does the guide adjust?
No. The V-guide is part of the one-piece body and stays square to the cutter.
What is the body made of?
Aluminum, with a wood knob.
The RUITOOL range
RUITOOL Marking Knives & Edge Tools in one place
Knives that strike a layout line, and hand tools that shape and trim an edge. 5 tools, from $19.91.